Macpower & Tytech Alumni User Manual

External Storage Enclosure for 3.5” Hard DriveIceCube | Pleiades User Manual& Installation Guide

You can choose to create several partitions but be aware that if you want to change this at a later point, it’s required to format the drive again o

Mac OS does not recognize NTFS formatted drives, to use your device on both platforms, we recommend you using FAT32. If you use Win2000 or WinXP a

If you want to use your drive on a PC running Microsoft Windows as well as on your Mac, we recommend you to use a PC to format the drive. Choose FA

Technical Questions For RMA and other questions, please contact your vendor or check out their online support area! Please read your warranty careful

Table of Contents CHAPTER 1 INTRODUCTION - 1 -ICON KEY - 1 - THE ICECUBE PLEIADES - 1 - AVAILABLE INTERFACES - 1 - SYSTEM REQUIREMENTS - 2 - PC REQUI

Chapter 1 Introduction Icon Key Throughout this manual you will see icons on the left margin that denote either Notes or Special Remarks as outlined b

Mac OS 8.6 users should use USB extension 1.41 or Firewire extension 2.6 and later, to be able to use USB 1.1 or 1394a. Package Content m

Your unit might come with an installed hard drive. Before opening such an enclosure, please read the warranty and any other notes from your vendor

The hard drive jumper settings should be master or factory default. Be careful not to damage any cables or components and double check the conn

Most problems occur due to driver problems on the Host Card side! If you buy a spare power adapter for your working place or at home, make sure

If the system doesn’t recognize the drive, turn on the power first, before connecting the USB/Firewire cable. Win98 does not support Firewire,

If the system doesn’t recognize the drive, turn on the power first, before connecting the USB/Firewire cable. For Mac OS 8.6, the USB extension h