Macpower & Tytech AR6 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
AR6 Pro User Guide
4 Appendix
4.1 FAQ
Q: How do I display the file properties?
A: Press the DISP button to see the file info and press it again to turn it off. For more details,
go to the File Library, select a file, click DISP and choose Properties. Press OK to close the
file info.
Q: How do I access preferences when it’s greyed out?
A: Exit the setup menu, press the HOME key to return to the main screen, press the
SETUP key to enter the setup menu again and you will be able to access preferences.
Q: Why can’t the output lock under preferences be selected?
A: To unlock this option, press the FAST FORWARD key.
Q: Where do I set the clock time?
A: Go to the SETUP menu and press the DISP key. Enter the time and confirm it. In the
following screens, select Cancel or press the DISP key to skip the rest of the settings.
Q: I pressed the OUTPUT key but it doesn’t change the video signal!
A: The video output has been locked. Unlock it first and then press the OUTPUT key again.
To unlock, press the SETUP key, go to Preferences, press the FAST FORWARD key once
and then select Output Lock. Turn it OFF and you can use the OUTPUT key to toggle
between the different video outputs.
Q: How do I upgrade the firmware?
A: Download the latest firmware from our website and store the ROM file on a media card
in the top directory. Then follow these instructions:
1. Turn off the device and remove all media cards.
2. Insert the media card with the new firmware.
3. Turn on the power and watch the screen.
4. It will read the new firmware and show Write/Erase during the process.
5. When the upgrade is finished (~ 1 minute), it will show Done and go blank.
6. Only now turn off the power and remove the media card.
7. Erase the firmware on your media card.
8. Turn the device back on; your new firmware is now ready to use.
Q: How can I view the content of the playlist on screen?
A: Stop playback and go to the file library. Either browse for and open the file named PLAY
or refer to all the file names that are in red, indicating that they belong to the current playlist.
Page 19 / Chapter 4 - Appendix
Page view 20
1 2 ... 16 17 18 19 20 21 22

Comments to this Manuals

No comments